Precision Drone Locking Clip CNC Milling Parts

The drone lock buckle CNC Milling part is a slender strip integrated structure with an S-shaped curved contour. One end is a thickened rectangular block with double vertical through holes and a longitudinal opening groove on one side; The other end is a symmetrical structure of double fork with parallel inside sides of the two forks and a circular opening at each end. Between the two horns there is a space for forming an elastic locking door; The central body is equipped with a through type elongated hollow groove.

Step 1: Choose qualified aluminum alloy rods or plates 7075, remove the materials that contain impurities, cracks or folding defects, cut CNC depending on the overall dimensions of the latch, make sure that the vacuum dimension is related to the hardness and draw the foundations for post-treatment.

Step 2: Using a high-precision CNC machining center, the multi face clamping is completed in one go to mill the gripper profile, form the locking groove, drill the installation hole, and precision machine the positioning surface; Based on the mature experience in CNC Milling Service, we strictly control the symmetry of the openings, the coaxiality of the drilling positions and the contour tolerances, to ensure the locking accuracy and reliability of the block.

Step 3: Perform manual and mechanical double deburring and rounding treatment on the edges, slots, and hole positions of the milled gripper to remove residual sharp edges, avoid scratching the arm or affecting the fitting accuracy, optimize the contact surface smoothness of the gripper, and improve clamping stability.

Step 4: Pre treat the locking buckle with degreasing, oil removal, and polishing, followed by hard anodizing to generate a uniform and dense high hardness oxide film, which greatly improves wear and corrosion resistance and customizes the colors as needed.

Step 5: Ultrasonic cleaning is used to remove oil stains and debris, and then the dimensions, opening elasticity, and surface quality are fully inspected using calipers, plug gauges, and shape and position tolerance testers. Based on the quality standards for CNC milling parts, the product is guaranteed to meet the precision requirements of unmanned aerial vehicles. After inspection, it is packaged and preserved.